3/4″ Standard Stretcher Bars

A very popular profile used for small & medium-sized canvases ranging from 10” to 60” (~25-153 cm). This profile (used with our 1/2″ x 3″ braces for bars longer than 36″) provides very strong and stable support for canvases.

Choose stock sizes to save up to 40% off the price of custom sizing. Stock sized Standard stretcher bars are available in two inch increments from 10″ to 60″. You can also order custom sizes in both imperial and metric (10-60″/25-153cm) using the custom calculator below – recommended bracing will be calculated automatically but can be increased if you wish.

If stretching a heavy material or sizing/priming linen, it is best to contact us  before ordering larger sizes as contraction of the fabric may affect the structural integrity of the frame. You can also check this chart which provides helpful information on choosing the right stretcher bar for your needs.

  • Standard stretcher bar profile - ideal for frames 10"- 60"

  • Standard stretcher bar with 1/2" bracing (recommended for bars 36" or longer)

  • Frames can be made to any size, metric or imperial (accurate within 1/16" or 1mm)

  • All bars and braces come with necessary keys

  • Order stock sizing to save up to 40% off custom pricing!

  • Stock bundles of 8 bars offer additional savings of 25%

  • All custom frames come with any required bracing and keys

BUY STOCK SIZED STRETCHER BARS AND SAVE!

Save 20% or more over custom sizing or choose bundles of 8 bars to save an additional 25%

Includes 2 keys per bar & brace

3/4″ Standard Stretcher Bars

$2.26$123.98 $

Very popular stretcher bars for small & medium-sized canvases, 10″ to 60″.

PER BAR
QTY.
PER BUNDLE
PER BRACE
SKU: N/A. Category: .

* Braces normally recommended for bar lengths 36 inches and over. If only one set of bars (one side of your frame) is 36 inches or longer, select a single brace in the smaller bar size (ie: in a 36”x18” frame, the brace would be 18”). When both dimensions of your frame are 36 inches or more, select a brace in both sizes.

ORDER CUSTOM SIZE STRETCHER FRAMES

CANVAS FRAME KITS INCLUDE FOUR STRETCHER BARS, PLUS NECESSARY BRACES AND KEYS

(Please specify bar lengths between 10 and 60 inches or 26 and 153 cm. Use decimals only, such as 12.75 for 12-3/4 inch.  Check this chart for conversions if unsure.

Sizing will be accurate within 1/16″ or 1mm. If you need a smaller or larger size, check here for help choosing the right stretcher bar for your needs.)

FRAME DIMENSIONS

$0.00
Recommended # of braces (calculates automatically based on your dimensions):
Vertical
Horizontal
RECALCULATE

* To change the number of braces, adjust the number in the box then click Recalculate.
* Quantity discount available on orders of two or more frames of the same size (2% off per frame to a maximum of 20% off).  Discount will be applied automatically at checkout.
* Bulk rates available – contact us for details.

 

3/4″ x 3” Standard Stretcher Bars & Braces

MATERIAL: Kiln dried, solid or finger-jointed clear white pine

STOCK BAR SIZES: Available in two inch increments from 10″ to 60″ (10″, 12″, 14″, 16″, 18″, 20″, 22″, 24″, 26″, 28″, 30″, 32″, 34″, 36″, 38″, 40″, 42″, 44″, 46″, 48″, 50″, 52″, 54″, 56″, 58″, 60″)

CUSTOM SIZES: Order using the custom calculator, above, for any size between 10″ and 60″ (~25cm-153cm) – accurate within 1/16” (1mm). For special orders outside of our stock or custom size range, please contact us or fill out our quote form.

BRACES: 1/2” x 3” clear white pine normally spaced at no greater than 30” centres starting at bar lengths of 36” to 40”. For frame sizes less than 40”, braces are often used to provide protection to the back of the canvas.
Each custom-made brace is designed with a 1/4” x 1/2” x 3” tenon on each end which fits into a matching mortise on the stretcher bar. The brace includes a very effective and attractive “hidden” slot design that holds the keys firmly in place.
In situations where braces must cross each other, a 3” wide, 1/4” deep dado joint is machined in each brace to provide a tight and flush nesting of the cross-braces. This joint is fastened together with a low profile nut & bolt inserted during final assembly. Universal Braces also available for situations where you want to add a brace to an existing frame.

KEYS: 3-1/2” long & 5/32” thick; made of birch plywood or ash solid hardwood. Two keys supplied each per bar and brace.

Product Description

BUY STOCK SIZED STRETCHER BARS AND SAVE!

Save 20% or more over custom sizing or choose bundles of 8 bars to save an additional 25%

Includes 2 keys per bar & brace

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Testimonials

Aenean sollicitudin, lorem quis bibendum auctor, nisi elit consequat ipsum, nec sagittis sem nibh id elit. Duis sed odio sit amet nibh vulputate cursus a sit amet mauris

Customer Loyalty
Program Info

Learn More

SEE ALL ONLINE PRODUCTS